Impact Resistant Roof Replacement in Whitesboro from $500. UL 2218 Class 4 at $500 to $800 a square -- and an honest answer about whether it is worth it for you. Free inspection and a written quote.
Against metal, the Class 4 argument shifts. Metal does not bruise, it dents -- which is cosmetic on a barn and not on a house elevation. On a Whitesboro property the honest comparison is often three-way rather than two, and we will price it that way.
Class 4 is the top impact rating under UL 2218. The test is a two-inch steel ball dropped twice on the same spot without cracking the mat, and a product that passes it is built to take hail that would bruise a standard shingle. In North Texas it installs at $500 to $750 per square against $350 to $500 for three-tab.



Class 4 is the top impact rating under UL 2218: a two-inch steel ball dropped twice on the same spot without cracking the mat. In North Texas it installs at $500 to $750 per square against $350 to $500 for three-tab -- a premium of 15 to 25% over standard architectural, or roughly $1,500 to $3,000 on a typical 2,000 square foot home. Metal moves a Whitesboro quote more than anything else, and the two systems are far apart: exposed-fastener is cheaper up front and carries periodic washer replacement, standing seam costs more and asks for almost nothing.
A heavier, tougher mat that resists the bruising hail causes, generally rated for 25 to 35 years. On a hail-exposed roof that is a genuine difference in service life rather than a marketing one.
Over twenty years in Grayson County the arithmetic favors Class 4 comfortably. Over five it does not. We will ask how long you intend to own the house and answer accordingly, including when the answer is no.
'Impact resistant' is a phrase; UL 2218 Class 4 is a rating. The scope should name the product and its class, along with the ridge, hip and starter products, because a Class 4 field with standard accessories is not a Class 4 roof.
Metal is far more common out here than in Sherman, and it is worth being precise about which kind. Exposed-fastener panels are screwed through the face with washers that perish and need replacing; standing seam hides its fixings and needs far less attention. They are different products at different prices.
It is the most common reassurance offered in this market and it is hollow by construction. Here is what to ask instead.
A roofing contractor working here must be registered with the City as a Roofing Contractor and must carry a $300,000 certificate of liability cover naming the City of Sherman as certificate holder. That is specific, local and checkable, and almost nobody asks about it.
It is what gets the work inspected, which is the only independent confirmation you will ever get that the specification you paid for is the one that went on. A contractor who would rather skip it is telling you something.
The Roofing Contractors Association of Texas runs a voluntary program. It is not a license and we will not pretend it is one -- but in a state that requires nothing, what somebody has volunteered for is more informative than what they were made to do.
Metal is far more common out here, and it is worth being precise about which kind before anybody prices anything.
Metal changes what you are looking for entirely.
Shingle is the minority covering out here, which matters when you ring round: a contractor whose week is metal may be less interested in your composition roof than in talking you out of it.
This is metal country and the distinction that matters is exposed-fastener against standing seam.
Out here low slope is more often a metal panel at a shallow pitch than a membrane, and the failure mode is completely different: capillary action drawing water back up a lap that is fine at a steeper angle.
The one place here with a City registration rule.
Older stock: board decking, valleys, dormers.
Splits by age. The newer roofs have seen hail already.
Almost all new build. What did the builder fit?
Lake exposure, and houses nobody is in to notice.
Small simple roofs. Price should track area here.
Acreage. The barn is usually the worse roof.
What is worth knowing before you book this.
No. 'Impact resistant' is a phrase anybody can print; UL 2218 Class 4 is a tested rating. Ask for the product name and its class in writing -- and check the ridge, hip and starter products too, because a Class 4 field with standard accessories is not a Class 4 roof.
No, and anybody who says otherwise is overselling it. It resists bruising from the hail sizes that routinely damage a standard shingle, and large enough hail will mark anything. What it buys is a longer service life on a roof that gets hit regularly.
Get a second opinion before you sign anything, and ask whether they are registered with the City of Sherman. A hail line damages thousands of roofs in twenty minutes and brings out-of-town crews into the county for the season. Some are perfectly competent; the check costs you nothing and it is the only one available in a state with no license.
Yes, and it is $75 in Sherman for residential or commercial. We pull it. The inspection that comes with it is the only independent confirmation you will get that the specification you paid for is what actually went on the roof, which is worth more than the fee.
No. The inspection is free, the written quote is free, and neither carries an obligation -- including when the answer is that your roof is fine and does not need anything. What we will not do is give you a price from the driveway, in either direction.
City of Sherman registration stated -- Texas issues no license. Standard and Class 4 priced side by side, not one of them.