Roof Replacement in Bells from $350. North Texas prices, and a straight answer about what 'licensed' means in a state that licenses nobody. Free inspection and a written quote.
The most predictable pricing on this list: small simple roofs with easy access, where a quote should genuinely track measured area. That also makes Bells the easiest place to compare two quotes -- if they differ by thousands on the same roof, one of them contains something the other does not.
Asphalt roofing in Texas is priced by the square -- a hundred square feet. Three-tab installs at $350 to $500 per square and Class 4 impact-resistant at $500 to $800, with North Texas generally landing at $500 to $750 for the Class 4 product. On a typical 2,000 square foot roof the gap between standard and Class 4 is roughly $1,500 to $3,000.



Texas prices asphalt by the square -- a hundred square feet. Three-tab installs at $350 to $500 and Class 4 impact-resistant at $500 to $800, with North Texas generally landing at $500 to $750 for the Class 4 product. On a 2,000 square foot roof that is twenty squares, so the arithmetic is straightforward once you know which product is being quoted. The most honest pricing on this list. Small simple roofs with clear access mean the number really is a function of area, product and deck -- so a quote well above that deserves a direct question about what is in it.
A simple gable, single story, clear access and a deck that turns out sound. In Bells and Howe that is the normal case and it sits at the bottom of the range.
Valley and dormer count, which is labor rather than area. Two stories. Board decking that has to be made good rather than nailed into. And the Class 4 product itself, at 15 to 25% over standard architectural.
Registration. Texas does not license roofing contractors at all, so there is no state license number -- but a roofer working in Sherman must be registered with the City and carry $300,000 of liability cover naming it as certificate holder.
A small town east of Sherman on the highway, quiet and largely residential.
Modest single-family housing on generous lots, with a scattering of rural property around it.
Small simple roofs with easy access, which makes this the most predictable pricing on the list: a quote here should genuinely track measured area rather than detail count. That also makes it the easiest place to compare two quotes honestly -- if they differ by thousands, one of them contains something the other does not.
Worth knowing before you start ringing round, because the queue after a storm line is measured in weeks rather than days.
Roofs in Grayson County do not generally reach the end of their lives quietly. A hail line comes through, and several thousand roofs across the county are damaged in the same twenty minutes -- so every roofer within fifty miles takes those calls in the same week, and out-of-town crews arrive to work the storm. That is when the door-knocking starts and when the queue is longest.
On a small simple roof the Class 4 premium is a small absolute number, because 15 to 25% of a modest job is modest.
Small roofs are quick to assess properly, which means there is no excuse for a verdict given from the driveway.
Simple gables with easy access make this the most honest shingle pricing on the site.
Small simple roofs are where metal is cheapest to fit well, because there is almost no hand-formed detail.
Small flat sections on small houses, which means the job is almost entirely edge detail: the ratio of perimeter to field is the worst on this list.
The one place here with a City registration rule.
Older stock: board decking, valleys, dormers.
Splits by age. The newer roofs have seen hail already.
Almost all new build. What did the builder fit?
Metal country, and the two systems are not the same.
Lake exposure, and houses nobody is in to notice.
Acreage. The barn is usually the worse roof.
What is worth knowing before you book this.
Only where it has actually softened, and as a rate per sheet in the written scope rather than a lump guess. On older Denison and Sherman housing the deck is frequently boards rather than plywood, which holds a nail differently -- established by looking, not by assuming.
Only on one existing layer with a sound deck. Two coverings is the practical ceiling, and an overlay on a hail-exposed roof also hides whatever the last storm did to the layer underneath -- which is a poor trade for the saving.
One to three days on site for a typical house, three to seven for metal, and one to two for a small simple roof. Weather moves all of it and we will not dry-in a roof we cannot finish. After a storm line the queue is the longer part rather than the work.
No. The inspection is free, the written quote is free, and neither carries an obligation -- including when the answer is that your roof is fine and does not need anything. What we will not do is give you a price from the driveway, in either direction.
Texas prices asphalt by the square -- a hundred square feet. Three-tab installs at $350 to $500 per square and Class 4 impact-resistant at $500 to $800, with North Texas typically $500 to $750 for Class 4. A 2,000 square foot roof is twenty squares. The Sherman permit is $75.
City of Sherman registration stated -- Texas issues no license. Standard and Class 4 priced side by side, not one of them.